xfx graphics card showing as intel 4000hd

ryank27

Reputable
Mar 31, 2014
23
0
4,510
so i have a xfx graphics card but in properties it is showing as an intel hd graphics 4000 card. why is this? please help! http:// -my graphics card
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

the pc is custom built, but my other specs are i7-3770k, 8gb DDR3 ram, gigabyte z77-UD3H motherboard.
and i dont think so, its just plugged into the back of my pc.
the only other things in my pc that intel is my processer. and my motherboard has a z77 intel chip

 

ryank27

Reputable
Mar 31, 2014
23
0
4,510


sorry i had a brain fart, yes my monitor is connected to my motherboard.
 
Because you have to go into the bios of the motherboard.
Where it say in the graphics section.
Device to intitalize first.

There is a list, IGPU, Pci-e.
You must set Pci-e as the default selected graphics display device.
Connect your monitor cable to the XFX card.
Make sure you have, if required the power connectors connected to the graphics card from the PSU you have.

XFX card should be detected.
Install the latest driver or one supplied with the new card from the disk provided.
 


Plug it out of there, and connect it to one of the ports in your graphics card.
Those should be below.
Then do what Shaun said. That should fix your issue.
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

how would i do this?

 

Just plug the monitor in the card and see if it works.
If it does, just install the drivers for your card from the nvidia website.
All should be well.
If it does not work, return to this thread.
Post results!
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510


i connected my hdmi/dvi cable to my gpu. and i changed my settings in the bios to pci (there is no pci-e) but the settings keep changing back to auto even after i saved and my monitor keeps using the vga. and there is no vga slot on the gpu.
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

so i have plugged in my hdmi to dvi cord into where it would fit in the gpu (there is two slots) but my moniter says hdmi no siginal.
(i have an asus monitor)

 

ryank27

Reputable
Mar 31, 2014
23
0
4,510


there is no simple dvi port on my monitor, only 2 hdmi and one vga
 


Then use a hdmi cord, not dvi to hdmi. -that's what i was confused about.
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

the only hdmi cord i have right now is a playstation/sony one i use for my ps3. would this still work?

 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

i tried, it still says no siginal. i dont know if it is a problem with the monitor or not.
it i got a dvi/vga spliter cable would that work
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510


not exactly, only the vga is picking up. even on the motherboard neither hdmi method works
 

ryank27

Reputable
Mar 31, 2014
23
0
4,510

Thank you very much for helping, i really appreciate it! :D