- Apr 1, 2014
- 9
- 0
- 4,510
Hi, so when this happened the computer obviously shut down.
My specs are
Asus Sabretooth 990fx
Corsair TX 650w
Phenom ii 965
2x cruicial 1333 4gb
So what was spilled wasn't a whole lot, but it hit the case fan and hit the mobo and gpu as far as i can tell. Maybe also one of the RAM slots.
I've dissasembled the whole thing and cleaned it out to the best of my ability. And disconnected any non essential parts.
Now the first time i booted up, the ram led was solid red. All components get power as far as i can tell. I took out one of the sticks and rebooted.
Then the ram led went back to normal, but now the cpu led is lit instead. After messing around a bit and trying the different ram slots, it was the gpu leds turn. That's where i'm at now.
So if i had another system to test all the parts i would do that ofc, but i don't. Now i'm wondering what might cause this weird Led behaviour. Is it most likely the Mobo or PSU or maybe the CPU (it doesent appear damaged thougj)?
Am i missing something here?
I wanna start by replacing components piece by piece to salvage as much as possible.
Thanks for any help i can get!
Cheers
My specs are
Asus Sabretooth 990fx
Corsair TX 650w
Phenom ii 965
2x cruicial 1333 4gb
So what was spilled wasn't a whole lot, but it hit the case fan and hit the mobo and gpu as far as i can tell. Maybe also one of the RAM slots.
I've dissasembled the whole thing and cleaned it out to the best of my ability. And disconnected any non essential parts.
Now the first time i booted up, the ram led was solid red. All components get power as far as i can tell. I took out one of the sticks and rebooted.
Then the ram led went back to normal, but now the cpu led is lit instead. After messing around a bit and trying the different ram slots, it was the gpu leds turn. That's where i'm at now.
So if i had another system to test all the parts i would do that ofc, but i don't. Now i'm wondering what might cause this weird Led behaviour. Is it most likely the Mobo or PSU or maybe the CPU (it doesent appear damaged thougj)?
Am i missing something here?
I wanna start by replacing components piece by piece to salvage as much as possible.
Thanks for any help i can get!
Cheers
wouldnt be fair to punch him.
Facebook
Twitter
Instagram