Sign in with
Sign up | Sign in
Your question
Solved

DDR2 RAM 800 mhz works individually but not working together

Tags:
  • DDR2
  • RAM
  • Memory
Last response: in Memory
Share
April 1, 2014 4:34:08 AM

At first when i upgraded with these ram the pc booted normal even i played games and everything was fine untill i install AMD radeon ramdisk and pc stopped working . Later when i started pc it only showed me a black screen after i try those each ram individually and they were working properly but they are not working together. Right now i re -install my old DDR2 ram 512 ram 533mhz along with ddr2 2 gb 800mhz ram the pc works normal these both ram are working together normally.But only the dual 2 gb ddr2 800mhz sticks are not working together. I formated my pc installed windows 8.1 cleared CMOS setting and even i removed all amd features inc ramdisk but still ram are not working together.

More about : ddr2 ram 800 mhz works individually working

a c 251 } Memory
April 1, 2014 4:54:29 AM

Have you tried moving them between slots?
m
0
l

Best solution

a c 2285 } Memory
April 1, 2014 8:31:58 AM

May need to add + 0.06 or so to DRAM voltage
Share
Related resources
April 1, 2014 2:17:25 PM

rolli59 said:
Have you tried moving them between slots?


i tried but it didn't work
m
0
l
a c 251 } Memory
April 1, 2014 2:21:30 PM

Then try the voltage bump. 0.05 volts at time max 0.2 total
m
0
l
April 2, 2014 2:52:19 PM

rolli59 said:
Then try the voltage bump. 0.05 volts at time max 0.2 total


My bios setup doesn't show me the timing adjustment and mistakely i increased the fsb voltage and the pc is not booting i tried my all best i cleared my cmos by removing battery as well as removing the jumper but none of them worked for me i even tried different ram placing in different slots even though i disconected everything including gpu and i replaced them again even i tried booting pc without gpu with my integrated vga slot but still problem exits. The most biggest problem for me is it sometimes open bios setup but before i change the values it just shutdowns and again the same it wont boot or show nothing .Please someone help ! thanks in advance
m
0
l
April 2, 2014 2:53:10 PM

Thanks everyone for giving your precious time for answering my problem
m
0
l
a c 251 } Memory
April 2, 2014 5:43:37 PM

Not sure what happened but resetting CMOS should zero everything.
m
0
l
!