Newly built PC turning off 10 seconds after starting, Please Help?

Toggle sidebar Toggle sidebar
K

KnightArtemis

Honorable
Dec 30, 2013
3
0
10,510
I recently built my own pc (like 10 minutes ago) and after it not turning on because the Power switch was in the wrong front panel socket on the motherboard, I finally turn it on and about 10 ish seconds later it powers down, then starts up automatically and would probably do that continuously, all the wires are connected and the GPU, CPU, psu seem to be working, my ideas involve the motherboard or possibly lack of power from the psu, I have a CS650M psu, with a Inno3d GTX 780, gigabyte Z87X-DH3, i7 4770 and stock cooler, 16gb Ram, 1tb hdd and 120gb 840 evo ssd and a Corsair 500r, any help is welcomed :)
 
Solution
brarboy
Check your cpu atx power connector. Also go through this guide:
http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html
If still doesn't work, take your setup out of the case. Let the cpu and heatsink remain as it is on the motherboard. Take out the ram and insert single stick in first slot(swap if it still gives the problem). Connect your display and keyboard. Connect psu main power and cpu atx-power connector. Turn the pc on by connecting both power pins with metal object. See if you get any display.
Sort by date Sort by votes
brarboy

brarboy

Honorable
Jan 13, 2014
2,122
0
12,460
Check your cpu atx power connector. Also go through this guide:
http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html
If still doesn't work, take your setup out of the case. Let the cpu and heatsink remain as it is on the motherboard. Take out the ram and insert single stick in first slot(swap if it still gives the problem). Connect your display and keyboard. Connect psu main power and cpu atx-power connector. Turn the pc on by connecting both power pins with metal object. See if you get any display.
 
Upvote 0 Downvote
Solution
V

Vivek Kumar Singh

Reputable
Apr 6, 2014
26
0
4,560
u can check the PSU and the HDD and if it seem to be ok then go for reinstalling your OS...... and then also nothing worked , use the warranty coverage to replace any faulty part then.....
let me know if anything worked......
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom