I have a new build on which I'm attempting to configure RAID 1. I power up and go into the Adaptec 6405E Controller BIOS and get the "No drives detected" message when I attempt to initialize the drives. Any advice on how to get the drives detectable? BIOS recognizes all memory modules.
Not sure if this is relevant but the cable harness that comes with the controller has 4 SATA cables and another cable whose connector isn't labeled. I can't seem to find any documentation regarding this connector closely resembling a USB or 1394 mobo connector.
Motherboard: ASUS Z87-A
BIOS version: 1602 x64
Build Date: 10/29/13
EC Version: MBE2-Z87-0227
ME Version: 9.0.22.1467
CPU: intel core i7-4770K LGA1150 @3.5 GHz, 8MB Cache, FSB Speed 3500 MHz
Memory 4 x 8GB G.Skill Ripjaws DDR3-1600
Adaptec 6405E Bios Version 5.2-0
OS: None yet; still trying to configure RAID on a new build; Will eventually install Ubuntu 14.04 with VMWare Workstation 10
Attempting to attach Seagate 4x2TB
Utilizing SATA cables for HDD and CD Rom drives (5 HDD; 2 Blu-ray Disc Drives)
Not sure if this is relevant but the cable harness that comes with the controller has 4 SATA cables and another cable whose connector isn't labeled. I can't seem to find any documentation regarding this connector closely resembling a USB or 1394 mobo connector.
Motherboard: ASUS Z87-A
BIOS version: 1602 x64
Build Date: 10/29/13
EC Version: MBE2-Z87-0227
ME Version: 9.0.22.1467
CPU: intel core i7-4770K LGA1150 @3.5 GHz, 8MB Cache, FSB Speed 3500 MHz
Memory 4 x 8GB G.Skill Ripjaws DDR3-1600
Adaptec 6405E Bios Version 5.2-0
OS: None yet; still trying to configure RAID on a new build; Will eventually install Ubuntu 14.04 with VMWare Workstation 10
Attempting to attach Seagate 4x2TB
Utilizing SATA cables for HDD and CD Rom drives (5 HDD; 2 Blu-ray Disc Drives)
Facebook
Twitter
Instagram