Hello everyone
I installed a new mobo and cpu yesterday, now my GPU suddenly doesn't work anymore.
The installed mobo is an Asus z87-DELUXE, the CPU is an Intel i7 4770k.
The GPU is a MSI N560GTX-TI Hawk, the board goes in 00AE (Legacy boot mode) mode, after a minute of being in 00AE the board goes to 00A0 which is the normal state. The screen stays black and nothing happens I cannot go to bios. The VGA_LED turns on red and stays red, this means that there is a problem there (according by the book).
All LEDS are running on my GPU and the fans are running aswel, when I put in my older MSI n9500GT it does work (this one only uses one lane + no external psu connection). The onboard graphics work aswel.
I tried putting my graphics priority to PCIE, then it worked once but after that not anymore again.
The drivers have been updated, my HDD has been wiped and a fresh copy of windows 7 x64 is installed, the bios has been updated aswel to the newest version.
When I try to use my N560GTX to test my changes and put in my N9500GT again after noticing nothing changed, I get a system repair request of windows, I tried this repair twice but now it says it can't change anything on it's own.
Have I missed anything or is my GPU dead?
My setup:
Corsair Obsidian 650d
Coolermaster GX 650W Bronze+
Asus Z87-DELUXE
Intel i7 4770k @Std clock speed - Cooled by Mugen4 PCGH Edition
Corsair Vengeance 2x4GB DDR3 1600MHz LP
Seagate Barracuda 500GB 7200RPM
1 Optical drive, no other drives
Thx in regards
Jonas
I installed a new mobo and cpu yesterday, now my GPU suddenly doesn't work anymore.
The installed mobo is an Asus z87-DELUXE, the CPU is an Intel i7 4770k.
The GPU is a MSI N560GTX-TI Hawk, the board goes in 00AE (Legacy boot mode) mode, after a minute of being in 00AE the board goes to 00A0 which is the normal state. The screen stays black and nothing happens I cannot go to bios. The VGA_LED turns on red and stays red, this means that there is a problem there (according by the book).
All LEDS are running on my GPU and the fans are running aswel, when I put in my older MSI n9500GT it does work (this one only uses one lane + no external psu connection). The onboard graphics work aswel.
I tried putting my graphics priority to PCIE, then it worked once but after that not anymore again.
The drivers have been updated, my HDD has been wiped and a fresh copy of windows 7 x64 is installed, the bios has been updated aswel to the newest version.
When I try to use my N560GTX to test my changes and put in my N9500GT again after noticing nothing changed, I get a system repair request of windows, I tried this repair twice but now it says it can't change anything on it's own.
Have I missed anything or is my GPU dead?
My setup:
Corsair Obsidian 650d
Coolermaster GX 650W Bronze+
Asus Z87-DELUXE
Intel i7 4770k @Std clock speed - Cooled by Mugen4 PCGH Edition
Corsair Vengeance 2x4GB DDR3 1600MHz LP
Seagate Barracuda 500GB 7200RPM
1 Optical drive, no other drives
Thx in regards
Jonas