Sign in with
Sign up | Sign in
Your question
Solved

how to stop signal fluctuation on point 2 point in acess point mode......???

Last response: in Wireless Networking
Share
April 8, 2014 12:57:06 PM

how to stop signal fluctuation on point 2 point in acess point mode......???
April 8, 2014 1:09:43 PM

Not really possible... What Access Points are you using? Mfg + Model
m
1
l
April 9, 2014 1:52:19 PM

Bullet M2 wireless device is the acess point.......P2P through Mikrotik Devices......
Is there any possiblities to stop Network Interfaces. If yes then how...???
m
0
l
Related resources

Best solution

April 9, 2014 2:56:43 PM

yes, you can always shut down a NIC from the Control Panel / Network and Sharing / Change adapter settings

If you look at a WiFi signal from an analyzer, you will see it is constantly in flux. Your best hope to stabilize it is with antennae setup and a clear path. The act of you walking between the devices disrupts the signal.
Share
April 9, 2014 4:17:21 PM

So many thanksss for ur explanation........That means u mean to say that the Network Interfaces is creating because of the electricity or electric fluctuation.....M i right Mr.Corroded ?
m
0
l
April 9, 2014 4:44:21 PM

hmm not really following your word. The WiFi signal generated by your WiFi Router and Access Point is a radio signal. Radio signals are prone to interference. The interference can be almost anything, your walking across the room, a florescent light turning on, the wiring in your building, your neighbor's WiFi...

Other things to mitigate issues are using the "Site Map" feature that most WiFi devices have, this will let you see the other WiFi networks around you. Look for strong networks on the same or adjacent channels. The non-overlapping channels are 1, 6, and 11 in the US. If most of your neighbor's are on the lower channels and almost nobody is on the upper, set yours to channel 11...

:-)
m
1
l
April 9, 2014 5:05:07 PM

ok......Thank you.

1st Qus. :- Is there any way to find out that......Which channel is good for the Location of India ( Orissa, Kendujhar, 758001 )....
Is it Possible 4 u ....???

2nd Qus. :- If not possible for Qus.no.1....then give me some suggetions...... when the Radio signals are interference because of walking across the room, a florescent light turning on, the wiring in a building, neighbor's WiFi... .......then how i control the signal interference..... Is there any way or not.......If yes kindly suggest....
m
0
l
April 12, 2014 1:29:05 AM

Ooooooo Mr.Tom......Thanksssss alot........ its working good now.... Many many thanks for ur suggetion....
1 more qus. -> Is computer viruses are affected to interference the wireless signal... .. .. ..
m
0
l
April 14, 2014 3:31:32 AM

Is computer viruses are affected to interference the wireless signal... .. .. ..
m
0
l
April 14, 2014 2:04:00 PM

New thread for that...
m
0
l
!