Sign in with
Sign up | Sign in
Your question
Solved

Powering a old ULTRA psu without the mobo?

Tags:
  • Power Supplies
  • Components
  • Cable
  • Hardware
  • Motherboards
  • Power
Last response: in Components
Share
a b ) Power supply
a b V Motherboard
April 9, 2014 5:29:37 PM

How do i do it? The cable coverings are thick and idk if i should cut into it to find out which ones are for the paper clip method... Is there another way i can power it?? Im gonna use it to power Fan controllers and some HDD or SSD's later so i really need it... if not im gonna have to rip a PSU from my previous system... but i really want to try this PSU first... thanks in advance!

More about : powering ultra psu mobo

Best solution

a b V Motherboard
April 9, 2014 5:38:05 PM

Have a look at this: http://www.mupuf.org/images/wt-rpm/connector_atx_pinout...

If it is an ATX one, you should be able to match the pins needed (green and black) for the paper clip trick on this picture.
Share
a b ) Power supply
a b V Motherboard
April 9, 2014 6:19:19 PM

Newbbuilder11 picked solution
m
0
l
a b ) Power supply
a b V Motherboard
April 9, 2014 6:20:25 PM

dav_jw said:
Have a look at this: http://www.mupuf.org/images/wt-rpm/connector_atx_pinout...

If it is an ATX one, you should be able to match the pins needed (green and black) for the paper clip trick on this picture.


Thanks! That sheet really helped! I did a test run and i powered it up! Then i hooked up a molex fan and bam! It runs! thanks man! now i can power my fan controllers! And maybe some others in the future!
m
0
l
Related resources
!