Sign-in / Sign-up
Your question
Solved

Need help (not advice) soldering fine coax to tiny MEMS microphone.

Tags:
  • soldering
Last response: in Other Consumer Electronics
April 11, 2014 7:18:06 PM

I have some very fine three conductor coax that I need to get attached to a very tiny (2.75mm L x 1.85mm W x 1.00mm H) MEMS microphone. Well, ten of them actually. I don't have anywhere the dexterity remaining to do this myself and need to find someone I can pay who has experience doing such fine work. Any pointers or offers appreciated.

Image of coax, MEMS and sewing pin for reference here:

https://www.dropbox.com/s/ub6wj1aso2mog1y/IMG_0002_.JPG

Edit: Come to think of it, it need not be that coax. Any fine wires that can be twisted to a diameter equal or less than that coax will do fine.

More about : advice soldering fine coax tiny mems microphone

Best solution

April 17, 2014 10:48:26 AM

If there is no electronic repair facility nearby a watchmaker or jeweler may be able to help.
Share
August 24, 2015 6:07:04 PM

americanaudiophile said:
If there is no electronic repair facility nearby a watchmaker or jeweler may be able to help.


Marvelous suggestion! Thanks. One of those I should have thought of myself. :-)

m
0
l