I have done my first computer build and I am going through the learning process. I installed two hard drives. A 120GB Samsung SSD and a 2TB Western Digital HDD. I am on a ASRock Z87 Extreme 4 motherboard and I have the SSD connected to the top of ports SATA3_0_1 and the HDD connected to the bottom. I do not have close to the knowledge most on here have, so I have some questions that may sound dumb and I apologize for that. But, with the SATA3_0_1, is the top SATA port 0 or 1? The ASRock instruction manual said to minimize boot time the 0 port should be used. I just want to make sure I am using the right port.
As far as my other issue, when I go to the Start, then Computer screen, the only hard drive listed under the Hard Disk Drives is the SSD drive. I see the HDD drive in the control panel hardware device manager. I am very confused. If it helps, I am running Windows 7 Ultimate.
Thanks
As far as my other issue, when I go to the Start, then Computer screen, the only hard drive listed under the Hard Disk Drives is the SSD drive. I see the HDD drive in the control panel hardware device manager. I am very confused. If it helps, I am running Windows 7 Ultimate.
Thanks