buying new ram not sure if it works

EEG SEXTANT

Honorable
Feb 9, 2014
108
0
10,690
alright so i just built a new pc iam not so good at pc's how ever my current motherboard supports 2133 mhz ram and 32gb and i have amd radeon 4gb 2133 x2 and its my birthday the 28th may so iam thinking of getting 1 more of thoose ram would that work?
 
Solution
They will most certainly work without having to enable xmp in the bios , you will be fine to install and you will be good to go
as long as you dont mix them with the 2133mhz ram you already have
Hi Eeg Sextant ,
buy exactly the same ram , exactly the same kit , brand , timings and voltage as you have and you should be good to go without a problem
just remember to enable xmp in bios or set manually as your board will more than likely not support 2133mhz natively
 

Tradesman1

Legenda in Aeternum
Can try, but mixing DRAM can be and often is problematic, XMP is programmed by the packaged set...so it may or may not work, if you do and have any problems, give me a shout, can often adjust timings voltages to get them to play if they don't want to, no guarantee, but good possibility ;)
 

EEG SEXTANT

Honorable
Feb 9, 2014
108
0
10,690
ummh i just saw something cool i wanna see if it would work http://www.netonnet.se/art/dator/komponenter/Corsair-VengeanceProRed16GB2133MHz/203960.7047/ the site is swedish but soemone may translate however if i return my current memories and get 2x2 of thoose wouldn't that be beast?
 
hi m8 no i did not say your supports 2133mhz only ! ,
i said "your board will more than likely not support 2133mhz natively " that is completely different
it was not untill after i posted this and logged in this morning that i even know what motherboard we are dealing with !
according to your motherboard specs i was correct your mobo will not natively support 2133mhz unless xmp settings are enabled.
you can use 2133mhz ram because you board will support speeds of up to 2133mhz. if you are using 2133mhz ram at the moment without
your xmp settings enabled or manually set then you motherboard will clock that ram down to the boards native speed of 1600mz