upgrading ram modules:

rockerbilly · Apr 18, 2014

ram upgrading ram to corsair 8gb 1600mhz total of 4 modules: my current ones are hp 4gb made up of 2 modules 10600 u-9-10-bo: my operating system windows 7 64bit motherboard msi b75a-g43....

Soand cpu intel 15 15-3570k would the corsair 8gb 1600mhz work ok once replaced the old ones

i7Baby · Apr 18, 2014

Yep. Check mobo website approved ram/qualified vendors list for new ram.

Turn off PC. Replace RAM. Boot into Bios. Check RAM is recognised and settings correct. Save and Exit into OS.

If not on QVL and doesn't work then you'll have to swap back.

rockerbilly · Apr 18, 2014

Yeh i checked the mobo manual and dose list the 1600mhz as compatible i simply just want to know if the change from the HP 10600 U-9-10-bo

i7Baby · Apr 18, 2014

If its compatible with your motherboard, then it should be OK

Tradesman1 · Apr 18, 2014

If it's a single 4 stick package should work fine, if it's 2 packs of 2 sticks each may have problems, may not

rockerbilly · Apr 19, 2014

Yeh by what im reading it would be best to fill all 4 slots. As at this moment im running 2x2gb of ram sticks which are not listed in the mobo manual they run very well.

Tradesman1 · Apr 19, 2014

Actually for 8GB, if the mobo supports 4GB sticks, and it should, for 8GB best would be a 2x4GB setup, less stress on the MC (memory controller) with only 2 sticks vs 4 sticks

Search

upgrading ram modules:

rockerbilly

Reputable

Tradesman1

i7Baby

Titan

rockerbilly

Reputable

i7Baby

Titan

Tradesman1

Legenda in Aeternum

rockerbilly

Reputable

Tradesman1

Legenda in Aeternum

TRENDING THREADS

Latest posts

Moderators online

Share this page