Far Cry 3 suddenly started lagging

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630
Hello my pc is :-

Intel pentium dual core 2.70ghz
4gb ddr3 ram
300w power supply
sapphire hd r7-240 1gb ddr5 overclocked to 900 and 1300 memory clock

I was getting 35-40 average fps in 1600x900 resolution on medium texture quality
but yesterday i put all component of my pc to clean it and now far cry 3 lagging only 22-28 fps :\

Why someone help plz ?
 
Solution
woaah 94 way too high , there is your problem , what cpu cooler do you have ?
check the coolers fan is working properly , perhaps check heatsink for dust buildup and blowout ,if no change in temps then shutdown and remove cooler and reapply new thermal compound , reinstall cooler on cpu run 4pin pwm from molex 12v and see if temps change ,if not get new cooler

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


nah.. graphic card ok 1 more thing i want to tell you that i also removed my cpu yesterday to clean it so is there something happen wrong ?
 

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


Done still same problem, and 1 more thing i notices is that cpu temperate is now too high previously it was 35-40 degree celcius at idle now 60-70 so might be the problem right ?

And while playing far cry 3 cpu temperate is 94 degree celcius
 
woaah 94 way too high , there is your problem , what cpu cooler do you have ?
check the coolers fan is working properly , perhaps check heatsink for dust buildup and blowout ,if no change in temps then shutdown and remove cooler and reapply new thermal compound , reinstall cooler on cpu run 4pin pwm from molex 12v and see if temps change ,if not get new cooler
 
Solution

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


I just removed dust and temperate is bit low when i broswe web with firefox with 3 tabs cpu temperate is 51 degree celcius so what should i do so i can play my games again as i were previously before removing cpu
 

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


1 more thing i notice is if i push cpu fan hard enough then it give me fps boost of 7-10
 

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


I know about manual fan control but how to set it max speed ?

This is what i have in bios settings :-

Capture.png
 

Kekoh

Reputable
Mar 21, 2014
772
0
5,360
Steps to solve:

1) PUT THERMAL PASTE ON THE CPU!!

WHY are you running your cpu without thermal paste? That is terrible. Why has no one else brought this up? One person even said it wouldn;t have an effect...
 

vikas_sharma

Reputable
Apr 3, 2014
61
0
4,630


Sorry i'm newbie in this stuff, how can i tell if thermal paste removed from cpu ?
 

TRENDING THREADS