Sign in with
Sign up | Sign in
Your question
Solved

AMD R7 200 with HD7660D

Tags:
  • Graphics
  • Monitors
  • AMD
Last response: in Graphics & Displays
Share
April 20, 2014 10:27:23 AM

Hi all,
I had three monitors running with the CPU - AMD A10 5800K - I bought a Radeon R7 250, however only two monitors will work from it. I have set the on board graphics to force on - but still cannot get three monitors working.

Please could someone help me out with some advice on how to resolve?

Thanks in advance, Luke

More about : amd 200 hd7660d

a b C Monitor
a b À AMD
April 20, 2014 10:28:32 AM

Are you using CrossFire on the APU and the dedicated GPU?
m
0
l
April 20, 2014 12:01:43 PM

Hi, thanks for your reply. I have enabled the AMD Radeon Dual Graphics in the AMD CCC, is this what you mean?
m
0
l
Related resources
a b C Monitor
a b À AMD
April 20, 2014 12:06:21 PM

Yes. Try disabling it, and then connect all 3 monitors on the GPU.
m
0
l
April 20, 2014 12:13:16 PM

Will that then also utilise the graphics card? Apologies - total noob!
m
0
l

Best solution

a b C Monitor
a b À AMD
April 20, 2014 1:06:49 PM

It will use the dedicated graphics card, not the APU. Don't expect high FPS while running 3 monitors and high settings on games.
Share
April 20, 2014 3:46:17 PM

Hi,
I tried rebooting with the Dual Graphic setting disabled and all monitors connected to the GPU, however, it will only show 2 monitors at any one time, where connecting directly to motherboard allowed for 3. Any ideas? Thanks for help!
m
0
l
a b C Monitor
a b À AMD
April 21, 2014 3:17:27 AM

lukestkd said:
TechCIDLC said:
Read this guide, it'll help:

http://support.amd.com/en-us/kb-articles/Pages/gpu50-am...


Thanks for the link - below is an image of the problem I have. CCC know's the monitor is there - but wont let me interact with it.
image

Can you give me a full screenshot?

m
0
l
September 8, 2014 3:58:15 PM

I have the same issue . I even tried to extend to the third , but it says I must disable one.
m
0
l
October 19, 2014 9:25:49 PM

sb1970 said:
I have the same issue . I even tried to extend to the third , but it says I must disable one.




this is what mine does.... i am running of the cards in crossfire


m
0
l
!