Sign in with
Sign up | Sign in
Your question

GT 630 doesn't work on my PC

Tags:
  • Graphics Cards
  • Boot
  • Graphics
  • Displays
Last response: in Graphics & Displays
Share
April 21, 2014 8:34:38 PM

GT 630:
http://www.digitalalliance.co.id/product/graphic-card/n...
My Pc:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAG...
i bought this graphics card yesterday
when i install it, no display problem. when i removed, it's normally boot
any sugestion, please

More about : 630 work

April 21, 2014 8:47:06 PM

Chairul Munajib said:
when i install it, no display problem. when i removed, it's normally boot
any sugestion, please
did your connect your monitor to gpu?

m
0
l
April 21, 2014 8:57:23 PM

did your able to boot in to BIOS, your sure the card siting in the right position and wired from psu.
m
0
l
Related resources
a b U Graphics card
April 21, 2014 8:58:23 PM

make sure you install it properly. push it a bit more. do you get error beeps?
m
0
l
April 21, 2014 9:05:29 PM

kapitalistas said:
did your able to boot in to BIOS, your sure the card siting in the right position and wired from psu.


this pc have integrated graphic display, after i read on CQ3685 product site, it can automatically detect graphics card installed. I can get in Bios using integrated graphic display, but when using graphic card it doesn't get into Bios.
Sorry for my english
I am from indonesia
m
0
l
April 21, 2014 9:21:05 PM

install the card and make sure power not plugged to pc. remove the BIOS battery for a minute and install back it loads default BIOS settings. located under gpu round metal tablet .then try boot in safe mode.
m
0
l
April 21, 2014 9:34:01 PM

ok i'll try later
I have reset the cmos and it's the same result
still blank, can not get in the Bios
is this some issue for this card
m
0
l
!