Do your installation looks like this ? :
http://gyazo.com/64017b82c092ec87faaee35b8b02d228
How did you set SATA, as IDE or ACHI or RAID in BIOS ? Generally we set SATA as IDE or AHCI in BIOS.
How to install Windows 64 bit on a UEFI BIOS:
http://www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
OR, you can try this method also :
Unplug all other HD's and peripherals, Boot into BIOS setup to see if there is an EFI Boot Disk in BIOS Boot order. If so remove it, set DVD drive first to boot. If EFI BIOS also set to Legacy BIOS.
Then boot into installer DVD or USB stick, at first screen Press Shift + F10 to open a Command Box, type:
DISKPART
LIST DISK
SEL DIS 0 (after confirming Windows 7 target HD #)
CLEAN
CONVERT MBR
CREATE PARTITION PRIMARY SIZE=102400 or any size you like
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
Next click Install Now to Clean Install Windows 7 to partition you created. If it fails then report back at which step and the verbatim error message.