Sign in with
Sign up | Sign in
Your question
Solved

How do I install a fan in the front of my case?

Tags:
  • Cases
  • Fan
  • Xigmatek
  • Systems
Last response: in Systems
Share
April 22, 2014 12:33:52 PM

I have a Xigmatek recon and in order to finish my build I need to install my 120mm fan on the front.
But at the bottom there is a box like thing (I am gussing the 2.5" bay) and its in the way and I cant get it out. I thought I would need to open it because it has a filter but I dont see where to do that.
Please help! I am getting a bit worried.

More about : install fan front case

April 22, 2014 12:49:42 PM

Look in manual or search online for manual for your case.

Most likely the front plastic of the case comes off and you install it that way.
m
0
l
April 22, 2014 1:02:23 PM

boosted1g said:
Look in manual or search online for manual for your case.

Most likely the front plastic of the case comes off and you install it that way.


I already looked everywhere online, I couldn't find anything. I also looked at the instructions, they don't tell you much.
m
0
l

Best solution

April 22, 2014 1:12:32 PM

Ok most likely you need to remove the front cover plastic

There may be some tabs that you have to push, but you should be able to grab from bototm and pull it away from tower.

There is a picture of this in box 1 of your manual.
Share
!