Thinking of selling my Mid-High end Gaming system.
Pc consists of:
HIS HD6850 Blue fan revsision with overclocking capability of 1025core /1200mem - Stock 775/1000 (Comes clocked at stock unless overclock is requested.)
AMD Athlon II x4 640 capable of 3.5 Ghz Overclock (3.0 standard will come as stock unless requested)
1x4 GB PNY DDR3 1333MHz R.A.M.
Biostar 880 AM3 Motherboard with custom cut VRM, Soundchip,Mosfet Heatsinks cut from Oxidized Aluminum. Thermal paste is mixed Thermal Epoxy and Tuniq TX-4 thermal paste (permanent bond)
The video card utilizes the stock heatsi k and fan assembly with no modifications except Tuniq Tx-4 paste being applied to the assembly and gpu diode instead of thermal pads resulting in lower fan speed necessity and way lower noise and temps.
Cpu cooler is the one shipped with the Phenom II x6 1100t - quad 6mm heatpipe design and assists with vrm cooling due to this being a 4-phase motherboard.
Power supply is a standard Dell OEM 750 watt power supply with a steady draw rated with my kill a watt at 745 with as much stuff as I could throw on it. This system only pulls around 350 max so you are golden for lighting and fan mods or even liquid cooling.
Case: Sentey abaddom v2 with custom cut side window. Fan mounting and air holes will be drilled using CnC press if requested.
No cd/dvd drive is included but you can boot from usb and the 500GB SataII 3.0GBs drive is rated at 5400 rpm and has little problems keeping up with this system at all.
Pc consists of:
HIS HD6850 Blue fan revsision with overclocking capability of 1025core /1200mem - Stock 775/1000 (Comes clocked at stock unless overclock is requested.)
AMD Athlon II x4 640 capable of 3.5 Ghz Overclock (3.0 standard will come as stock unless requested)
1x4 GB PNY DDR3 1333MHz R.A.M.
Biostar 880 AM3 Motherboard with custom cut VRM, Soundchip,Mosfet Heatsinks cut from Oxidized Aluminum. Thermal paste is mixed Thermal Epoxy and Tuniq TX-4 thermal paste (permanent bond)
The video card utilizes the stock heatsi k and fan assembly with no modifications except Tuniq Tx-4 paste being applied to the assembly and gpu diode instead of thermal pads resulting in lower fan speed necessity and way lower noise and temps.
Cpu cooler is the one shipped with the Phenom II x6 1100t - quad 6mm heatpipe design and assists with vrm cooling due to this being a 4-phase motherboard.
Power supply is a standard Dell OEM 750 watt power supply with a steady draw rated with my kill a watt at 745 with as much stuff as I could throw on it. This system only pulls around 350 max so you are golden for lighting and fan mods or even liquid cooling.
Case: Sentey abaddom v2 with custom cut side window. Fan mounting and air holes will be drilled using CnC press if requested.
No cd/dvd drive is included but you can boot from usb and the 500GB SataII 3.0GBs drive is rated at 5400 rpm and has little problems keeping up with this system at all.
Facebook
Twitter
Instagram