Replaced water cooling system and my computer won't load

fatexmania

Reputable
Apr 23, 2014
6
0
4,510
Posting again cause I accidentlysolved my last post

OK...so I was having issues with overheating cause my Corsair H60 went out. Replaced it with the antec kuhler 620. Started it up and it worked fine (I think). BIOS reading was at 33C and stable. Restarted the comp and this time everything load real slow. Wanted to restart again to check BIOS temps and now it doesn't work at all. The computer turns on (lights, fan, antec, etc.) but the screen is black. The monitor, mouse and keyboard are getting no feed from my comp. Any advice?

My fan is also speeding up and slowing down slightly. Don't know if that has happened before...

To: Badboyrog2 - I don't know specs exactly cause my comp wont turn on. I believe its an AMD 8-core 4GHz FX2. Radeon 7200 video card. That's about all I know and im not 100% sure it's accurate. Im not too computer savvy.
 
Solution
check and make sure the video card and the ram are seating in the slots properly, they can come loose sometimes but still be plugged in.

also when took off the old cooler, did you pull the cpu out as well?

fatexmania

Reputable
Apr 23, 2014
6
0
4,510


Checked all parts and they are in properly. I did not pull out the CPU when installing the cooler. Just unscrewed the old one and screwed in the new.