so i just built this computer and it runs great just that i hear no sound from either my Asus VS229 monitor or the pc itslef. could anyone tell me why i cant hear anything? i did plau in the F-Audio in the motherboard btw
You need a set of speakers plugged in to get sound
yup that the one
r u sure because on the monitor there is volume on the OSD setup and its on 100%. also on my pc i hear the beep when it turns on but i know thats not the audio but i did plug it in
You need a set of speakers plugged in to get sound
and i hear audio from headphones btw
That proves the sound works then. DO you have speakers, and are they plugged into the right port? It should be the green port at the back audio panel
are the speakers supposed to come with the case? or something? or do i buy them? because i plugged in everything from the case expect this one that says
.VCC
USB1-
USB1+
GND
there is no where to plug them so i just plugged them in the usb 3.0 because the usb 3.0 has 8 pins and the one i just said has 4 so i plugged it in and it works but not sure if its ok. still cant hear though
There's a wide variety there from basic sets to high-end and surround speakers. For a basic stereo set, just use the green hole in the back of the motherboard
The other ports are used for mic and surround sound setups
There's a wide variety there from basic sets to high-end and surround speakers. For a basic stereo set, just use the green hole in the back of the motherboard
The other ports are used for mic and surround sound setups
That sound driver will process sound internally. Ordinarily a PC won't show speakers there if it doesn't detect anything plugged in but that VIA chip might not do that. Were your headphones plugged in when you took that sceenshot?