Solved

Realtak network controller could not found, if deep sleep mode is enabled plug the cable.

sir/madam i have using my motherboard of gigabyte 5 months ago. I had been encouned the problems of network driver. Whenever i tried to install network installer it says realtak network controller could not found, if deep sleep enabled please plug the cable. So i'm totally disappoined. I don't know what should i do.. I tried some possible solutions which are does not worked at all. I reset bios as removed the ram memory. I tried to change current os to windows 7 ultimate. I tried to change the drive which are originals driver from motherboard driver pack. I tried to do another thing which all shared around the internet. But i could not found possible helpfull solution still then. So i kindly request you to give me a possible solutions that would be appreciated. Hopefully . . . .
Reply to nithin kannan
11 answers Last reply Best Answer
More about realtak network controller found deep sleep mode enabled plug cable
  1. What Gigabyte motherboard? You basically imply that it connects to the network, but you are unable to install the drivers?
    Reply to GhislainG
  2. i'm using G1-H61M-S1 rev2.2. I'm currently installed drivers are from the motherboard disk.. There is no update available for these drivers. It's all dated 2013.
    Reply to nithin kannan
  3. Best answer
    I unselected the current solution because you shouldn't select it until the issue is resolved.

    The latest drivers are available at http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

    Please explain exactly what's going on. Does the controller work or not? If it works and the issue only occurs when the system goes into sleep mode, then follow this procedure:

    Click Start, Control Panel, System and Security
    Click Device Manager (under System)
    Double-clik Network adapters
    Double-click the Realtek Network Controller
    Select the Power Management tab
    Uncheck “Allow the computer to turn off this device to save power”
    Reply to GhislainG
  4. Dear sir
    actually my problem is whenever i installed realtak ethernet controller it says that realtak network controller could not found, if deep sleep enabled please plug the cable. I want to know that my system bought for 5 months ago. Within in the days why this happened.? And i can access internet through via pc suite. But i have no connections of broadband. I just want to browse internet. As you told to do, i could not found any realtak ethernet controller. But i'm very sure i installed the driver from motherboard disk. Sometime the driver come out if i rest the bios as to remove ram for sometime. After i while i just restart the system the driver would goes to hide. This is my exact problems. I apologying to you if my english is bad..
    Reply to nithin kannan
  5. I'm having the same the same problem
    Reply to renners
  6. Is the Realtek LAN controller enabled in the BIOS? If it is and the OS doesn't see it, then the motherboard may be defective.
    Reply to GhislainG
  7. It is enabled on BIOS I think I just need to installed realtek drivers not sure I'll check it out when in at PC next
    Reply to renners
  8. GhislainG said:
    I unselected the current solution because you shouldn't select it until the issue is resolved.

    The latest drivers are available at http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false

    Please explain exactly what's going on. Does the controller work or not? If it works and the issue only occurs when the system goes into sleep mode, then follow this procedure:

    Click Start, Control Panel, System and Security
    Click Device Manager (under System)
    Double-clik Network adapters
    Double-click the Realtek Network Controller
    Select the Power Management tab
    Uncheck “Allow the computer to turn off this device to save power”



    Can you help me
    I can't see my realtek network driver in device manager and i can't install for the same reason as the guy who asked this question.
    Reply to FPS McDuck
  9. nithin kannan said:
    sir/madam i have using my motherboard of gigabyte 5 months ago. I had been encouned the problems of network driver. Whenever i tried to install network installer it says realtak network controller could not found, if deep sleep enabled please plug the cable. So i'm totally disappoined. I don't know what should i do.. I tried some possible solutions which are does not worked at all. I reset bios as removed the ram memory. I tried to change current os to windows 7 ultimate. I tried to change the drive which are originals driver from motherboard driver pack. I tried to do another thing which all shared around the internet. But i could not found possible helpfull solution still then. So i kindly request you to give me a possible solutions that would be appreciated. Hopefully . . . .


    Same [CENSORED] ;x t... Try to turn off the computer and plug in the power cable> Wait 10 minutes> Turn it on again... i saw this in other forum!
    Reply to peaceoutnewb
  10. I got all working by
    1. Set all LAN settings disabled from BIOS
    2. Uninstall network adapter device and drivers from Device manager
    3. Reboot and set all LAN settings enabled from BIOS and when i logged in, drivers was started install automatically
    That's how i solved it.
    Reply to Kebaz
  11. Kebaz said:
    I got all working by
    1. Set all LAN settings disabled from BIOS
    2. Uninstall network adapter device and drivers from Device manager
    3. Reboot and set all LAN settings enabled from BIOS and when i logged in, drivers was started install automatically
    That's how i solved it.


    How did you do this/ what steps. I do not know how to disable LAN setting from BIOS. I'm running windows 8.1 and I'm having exact same problem as you were. thanks
    Reply to quetip
Ask a new question Answer

Read More

Network Controller Motherboards