Im trying to connect my wifes desktop in bedroom to get internet. I had a usb wireless adapter that broke. I have a Asus RT-N12 router connected to my modem in the living room that s connect ethernet to my desktop. I have a belkin wireless g router i was thinking of connecting in the bedroom to give internet to my wifes desktop via eathernet. How would i go about doing this.
I have an Asus RT-N12 router and im trying to setup a belkin wireless g router in my bed room to give internet to my wife desk
- Thread starter Altheas
- Start date
This will work only if the belkin router can be reconfigured as a wireless bridge.
Since I dont have a model number I can not look that up.
Also with wireless N, for wireless G to work you have to have n+g devices, and use tkip (or tkip+aes) encryption as wireless G does not support AES encryption. Unfortunately this will limit all devices to 150mbps (if your router can do 300mbps).
Since I dont have a model number I can not look that up.
Also with wireless N, for wireless G to work you have to have n+g devices, and use tkip (or tkip+aes) encryption as wireless G does not support AES encryption. Unfortunately this will limit all devices to 150mbps (if your router can do 300mbps).
you need to follow these steps then your router will be connected to the wifi.
first of all you need to connect your belkin router to the asus router with ethernet cable.
then you need to connect you need to connect your computer to the belkin router .
once you will do that then you need to open your belkin router setup page by the help of 192.168.2.1 and then go to network settings . now you will able to see there your router ip address just make this ip address as 10.0.0.1 on the router, now you need to restart your computer and router will start working fine .
first of all you need to connect your belkin router to the asus router with ethernet cable.
then you need to connect you need to connect your computer to the belkin router .
once you will do that then you need to open your belkin router setup page by the help of 192.168.2.1 and then go to network settings . now you will able to see there your router ip address just make this ip address as 10.0.0.1 on the router, now you need to restart your computer and router will start working fine .
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 15
Facebook
Twitter
Instagram