Computer freez and not recognizing hard disk.

Toggle sidebar Toggle sidebar
N

nithin kannan

Reputable
Apr 25, 2014
20
0
4,510
Hello friends
i'm having a problem with windows 8. My system keep freezing after turn it on. Except network controller all the drivers installed from motherboard disk. Once a day i tried to format my hard disk but i could not done that. Because when i click format it loading long time and the end of it shows could not format. And even i could not install any os without error.. After one hour i tried again but i not click format i just click next at that time windows installed without any error. After a day i encounted freezed.. My system keep freezing while i don't do anything. The mouse not moving.. I have no way to put power off switch..
Coming network problem. It says deep sleep mode enabled then plug the cable..

some time bios could not identifying hard disk while i pressing f12 during the boot periode. please give of possible solution .
System specification
MB GIGABYTE H61M-S1 REV 2.2
BIOS VER FC
CPU INTEL G2020
RAM ADATA 2GB
NO OUERCLOCKING
CPU TEMP 35C
OS WIN8 PRO
HDD TOSHIBA 500GB
POWR SUPPLY 230W
All the componeds are under the warrenty..
 
Solution
Phillip Corcoran
The hard drive is probably faulty and needs replacing. If it's still under warranty, contact the hard drive manufacturer.

Before doing that you should test it with the manufacturer's own diagnostic software because they will probably insist you do that anyway. Toshiba only have diagnostic software for "Fujitsu" branded Toshiba hard drives, but you can use HGST Drive Fitness Test for DOS. The CD Image is here: http://www.hgst.com/support/downloads/legacy-downloads#DFT

Create a CD from the image file with ImgBurn: http://filehippo.com/download_imgburn

Then boot your system from it. When you see a menu, select "ATA Only" and press <Enter>.
Sort by date Sort by votes
Phillip Corcoran

Phillip Corcoran

Titan
Moderator
Sep 7, 2013
25,977
860
120,140
The hard drive is probably faulty and needs replacing. If it's still under warranty, contact the hard drive manufacturer.

Before doing that you should test it with the manufacturer's own diagnostic software because they will probably insist you do that anyway. Toshiba only have diagnostic software for "Fujitsu" branded Toshiba hard drives, but you can use HGST Drive Fitness Test for DOS. The CD Image is here: http://www.hgst.com/support/downloads/legacy-downloads#DFT

Create a CD from the image file with ImgBurn: http://filehippo.com/download_imgburn

Then boot your system from it. When you see a menu, select "ATA Only" and press <Enter>.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom