new Fm2+ build no signal

Bosaile1

Honorable
Dec 19, 2013
122
0
10,710
hi i have went to microcenter the other day and bought

A10 6800k
FM2A88X Killer FM2
4gb DDR3 crucial ballistix 1600 mhz
Western digital 1tb caviar blue
NZXT H230
Corsair CX 750 (refurb) but comes on and everything

alright so i put it all together and powered it on to my tv with a hdmi. the fans spin and everything is powered on but it shows nothing on both of my tv's. neither one works. so please tell me what could be the problem?
 
Solution
If that case has the std FP connections, all that would do is affect the LEDs working or not. The start/reset buttons will work in either polarity and the audio & USB couldn't be swapped or plugged in wrong because they are keyed. (But check that you have them on the correct headers. A few other headers are close enough to the pin-out of the USB/audio that they might "fit".)

It does begin to sound like a MB issue or a defective APU. More likely the MB.

Bosaile1

Honorable
Dec 19, 2013
122
0
10,710
yeah i have a friend with a monitor but he s gone right now, i have built tons of pc's but never built a APU system. i just noticed the fans in the pc speed up and slow down constantly. i unplugged the 8 pin cpu and plugged it back in. i even tried putting a old 7770 in there and no signal. the tv i am using for it has always worked on my builds. im thinking about taking the mobo back and getting anothher one. if one of the front panel connectors are wrong could that be the problem?
 

clutchc

Titan
Ambassador
If that case has the std FP connections, all that would do is affect the LEDs working or not. The start/reset buttons will work in either polarity and the audio & USB couldn't be swapped or plugged in wrong because they are keyed. (But check that you have them on the correct headers. A few other headers are close enough to the pin-out of the USB/audio that they might "fit".)

It does begin to sound like a MB issue or a defective APU. More likely the MB.
 
Solution