Reseted my bios with the jumper,now my pc does not see my monitor
- Thread starter Poly m
- Start date
Solution
Shaun o
Illustrious
- Oct 7, 2007
- 6,113
- 1
- 41,960
If you reset the bios settings via the jumper on the motherboard.
And the motherboard has on board video output you must remove the monitor cable from the back of the Pci-e based graphics port to the motherboard video output.
The bios will be displayed there.
Once you are in the bios set in the order list for graphics device interface to Pci-e or peg mode.
Once done save the settings before exiting the bios.
Connect the monitor cable back to the Pci-e based card and when you press the key to enter bios setup it will always display from that card from then on.
And the motherboard has on board video output you must remove the monitor cable from the back of the Pci-e based graphics port to the motherboard video output.
The bios will be displayed there.
Once you are in the bios set in the order list for graphics device interface to Pci-e or peg mode.
Once done save the settings before exiting the bios.
Connect the monitor cable back to the Pci-e based card and when you press the key to enter bios setup it will always display from that card from then on.
TRENDING THREADS
-
Question Buying a used card, what should I look for before purchase?- Started by MatthewJamess
- Replies: 8
-
Question Download speed is slow on only my PC - please help!- Started by Ograsmium
- Replies: 16
-
-
-
Facebook
Twitter
Instagram