Limited connectivity if AP connected to switch

SQuinTeX

Reputable
May 6, 2014
4
0
4,510
hello guys, this is my networking setup
wTw3Uku
.

the wireless router is innacom
switch is 24port dlink des-1024D
wireless AP is dlink dsl-2640B

my problem is, if i connect the wireless AP to switch, in about 5 minutes or so, all my pc or wireless connected devices will get limited connectivity. i need to turn off the switch and wireless AP and turn both on again to have another 10 or 5 minutes or maybe an hour if i'm lucky. people who connected directly to innacom wireless router never have any problem with their connection. the connection would be fine as long as i don't connect the wireless AP to the switch.

what is the problem with my setup or the wireless AP is the problem? i know that the wireless AP isn't a "real AP" but i don't have problem with it before as a wireless router. if the wireless AP is the culprit, why all the pc connected to switch also got limited connectivity?

in case the image doesn't display, this is my setup picture : http://imgur.com/wTw3Uku

sorry admin if i violate any forum rules. i've tried to be specific as i can.
 

hklt0110

Reputable
May 5, 2014
19
0
4,520
1.) check your lan cable from innacom going to switch.
2.) insert/put the lan cable from Innacom to Port 1 of your Switch. Insert/Put the lan at the last or number 2 port of the switch going to your AP.
3.) Configure all interfaces of clients, router and AP to Speed auto, duplex auto.

 

SQuinTeX

Reputable
May 6, 2014
4
0
4,510
innacom : 192.168.0.1
dsl-2640b : 192.168.0.100

i use 1st port on dsl-s640b and i already tried changing to different port couple weeks ago but the problem persist.