- Jan 12, 2012
- 7
- 0
- 18,510
Hello guys. I use an ssd for my os and several hdds for storage. I tried hooking up 2 of them, a WD caviar black and a WD caviar blue, as RAID0. So I left my ssd in the native sata3 by intel, and I hooked the other two in the sata2 ports also run by intel. I changed from AHCI to raid, set up my raid0 array, rebooted, checked bios if everything is ok and rebooted. Since then I havent been able to boot. I get a BSOD a bit before windows 7 loads. Any ideas?
Facebook
Twitter
Instagram