Sign in with
Sign up | Sign in
Your question
Solved

Asus z87 pro & Corsair H60 pump

Tags:
  • Water Cooling
  • Cooling
  • CPUs
  • Corsair
Last response: in CPUs
Share
May 6, 2014 11:40:53 AM

Hi, this may be a bit of a newby question as it is my first build however, i'm unsure as to where I should connect the 3 pin pump of my corsair H60. I've tried it on the cpu fan head as well as the CPU opt fan header and even on the Channel fan header. Each time on all of the above set ups the CPU temp has just continually risen. Is the pump broken or do I need to plug in a different head or would I need to adjust in the BIOS? Again apologies in advance if this question is elementary.

More about : asus z87 pro corsair h60 pump

a c 1013 à CPUs
May 6, 2014 1:44:53 PM

You tried the correct ones cpu fan , CPU opt .

They should work .
m
0
l
May 6, 2014 1:57:43 PM

SR-71 Blackbird said:
You tried the correct ones cpu fan , CPU opt .

They should work .


Yes I've tried all combinations and each time in the BIOS it shows the connection it's plugged in to as N/A. Would this probably suggest that the pump is broken
m
0
l
Related resources

Best solution

a c 1013 à CPUs
May 6, 2014 2:05:05 PM

Sounds like it might be DOA.
Share
May 6, 2014 2:08:10 PM

SR-71 Blackbird said:
Sounds like it might be DOA.


I thought that may be the case . That's annoying it's the second one now , as the first was leaking when I got it . Thank you for your help anyway .
m
0
l
!