- Feb 13, 2012
- 174
- 0
- 18,680
Hi Guys
First of all I would like to say I am not if this is the correct category, so please let me know if I should change!!
I have just dismantled 3 computers and made two from these.
The one that I am having a problem with has these parts:
CPU: Intel® Core 2 Quad Q9550
CPU Cooler: Coolermaster Hyper TX2
Motherboard: Asus P5Q Pro (Intel P45 chipset, Crossfire)
Memory: 8.0GB Corsair DDR2 800mhz XMS2 (4x 2GB)
Hard Drives: 250gb S-ATAII 3.0Gb/s
Optical Drive: 2 x IDE drives
Graphics card: NVIDIA GeForce GTX 260 896MB
Sound card: Onboard 7.1 Audio
Operating System: Windows 7 Ultimate
PSU: Corsair TX750W
Case: Antec Three Hundred
I connect to the display and get the dreaded no signal.
I have tried the graphics card in another machine and it works, so not that.
I have taken out the RAM and clean it but no joy.
I also notice that the optical drives do not open when I press the buttons - must be related I think?
I am wondering if I have connected all the cables correctly so am attaching some photos (hopefully)
http://imageshack.com/a/img838/2230/3z0q.jpg
http://imageshack.com/a/img834/8435/iaava.jpg
http://imageshack.com/a/img836/1782/8btp.jpg
http://imageshack.com/a/img834/5825/hpof.jpg
http://imageshack.com/a/img834/6422/tyrgs.jpg
If anyone can help on this I would be very grateful. Thanks in advance.
First of all I would like to say I am not if this is the correct category, so please let me know if I should change!!
I have just dismantled 3 computers and made two from these.
The one that I am having a problem with has these parts:
CPU: Intel® Core 2 Quad Q9550
CPU Cooler: Coolermaster Hyper TX2
Motherboard: Asus P5Q Pro (Intel P45 chipset, Crossfire)
Memory: 8.0GB Corsair DDR2 800mhz XMS2 (4x 2GB)
Hard Drives: 250gb S-ATAII 3.0Gb/s
Optical Drive: 2 x IDE drives
Graphics card: NVIDIA GeForce GTX 260 896MB
Sound card: Onboard 7.1 Audio
Operating System: Windows 7 Ultimate
PSU: Corsair TX750W
Case: Antec Three Hundred
I connect to the display and get the dreaded no signal.
I have tried the graphics card in another machine and it works, so not that.
I have taken out the RAM and clean it but no joy.
I also notice that the optical drives do not open when I press the buttons - must be related I think?
I am wondering if I have connected all the cables correctly so am attaching some photos (hopefully)
http://imageshack.com/a/img838/2230/3z0q.jpg
http://imageshack.com/a/img834/8435/iaava.jpg
http://imageshack.com/a/img836/1782/8btp.jpg
http://imageshack.com/a/img834/5825/hpof.jpg
http://imageshack.com/a/img834/6422/tyrgs.jpg
If anyone can help on this I would be very grateful. Thanks in advance.
Facebook
Twitter
Instagram