HDD becomes RAW and NTFS again?

Carlows Martinez

Reputable
May 10, 2014
1
0
4,510
The problem started today after I restart my computer, I started to get a lot of errors from programs that are installed on the E:/ and D:/ partitions (same drive), It starts ok and then suddenly the drive becomes a RAW filesystem (that's what I get from a chkdsk execution). After a long while, the drive becomes again NTFS (Just for some minutes).

some pics:

http://i58.tinypic.com/30ivor8.png

http://i58.tinypic.com/jazwid.png

http://i58.tinypic.com/2r27ho2.png

http://i58.tinypic.com/o6d0dg.png

Also, I get a BSOD with the following error: KERNEL DATA_INPAGE_ERROR

My English is poor, so I apologize; What should I do to solve this problem? Maybe the HDD is just damaged?

edit: I also get this from chkdsk

Stage 4: Looking for bad clusters in user file data ...
Read failure with status 0xc0000483 at offset 0x25777000 for 0x8000 bytes.

A disk read error occurredc0000483
Read failure with status 0xc0000483 at offset 0xcc4400 for 0x400 bytes.
The disk does not have enough space to replace bad clusters
detected in file 238 of name .
Read failure with status 0xc0000483 at offset 0x41185000 for 0x10000 bytes.

A disk read error occurredc0000483
Read failure with status 0xc0000483 at offset 0xc69800 for 0x400 bytes.
The disk does not have enough space to replace bad clusters
detected in file 239 of name .
Read failure with status 0xc0000483 at offset 0x40000 for 0x400 bytes.
An unspecified error occurred (6e74667363686b2e b10).
 
Yep, sure sounds like the disk is failing - really no need to test it as I'm 99% certain it is failing, but to confirm (as long as it's not your boot drive) you can test it with SeaTools for Windows (any brand of drive) or WD Data LifeGuard for Windows (WD drives only):

SeaTools: http://www.seagate.com/gb/en/support/downloads/item/seatools-win-master/

WD DLG: http://support.wd.com/product/download.asp?groupid=613&sid=3&lang=en

 
Solution