Solved

Graphics Card will it fit in my case?

Would the NZXT 210 Source Case be able to fit this http://www.newegg.com/Product/Product.aspx?Item=N82E16814487007
16 answers Last reply Best Answer
More about graphics card fit case
  1. Best answer
    yes, it'll fit.
  2. nzxt 210 can fit gpu's up to VGA Clearance Maximum 230mm w/ hard drive, 330mm w/o hard drive - http://www.nzxt.com/product/detail/105-source-210-case

    Your link shows the card is 11" x 5.9" (11" = 279mm) - so you'll have to take the hdd cage out.
  3. i7Baby said:
    nzxt 210 can fit gpu's up to VGA Clearance Maximum 230mm w/ hard drive, 330mm w/o hard drive - http://www.nzxt.com/product/detail/105-source-210-case

    Your link shows the card is 11" x 5.9" (11" = 279mm) - so you'll have to take the hdd cage out.


    Problem...you can't. It's screwed into the bottom.
  4. you can take them out.
  5. It says "w/o hard drive". So you should be able to remove it.
  6. i7Baby said:
    It says "w/o hard drive". So you should be able to remove it.


    http://www.newegg.com/Product/Product.aspx?Item=N82E16811146075
    I dont think you can
  7. That link says exact same thing - "VGA Clearance Maximum: 230mm w/ hard drive, 330mm w/o hard drive"
  8. i7Baby said:
    That link says exact same thing - "VGA Clearance Maximum: 230mm w/ hard drive, 330mm w/o hard drive"


    I can't find a way to take out the hard drive though! It's like completely attached to the case.
  9. you should be able to either screw them out and pull out the HDD cages.
  10. It should be on the case manual/brochure
  11. i7Baby said:
    It should be on the case manual/brochure


    I looked and can't find a single thing sadly :(
  12. link a photo of inside your case, may help.
  13. unknownofprob said:
    link a photo of inside your case, may help.


    http://hmmblah.com/images/nzxtsource210/IMG_0698.JPG
    Not my PC just one I found on google images with my case
  14. move your HDD's down and your problem is solved!
  15. unknownofprob said:
    move your HDD's down and your problem is solved!


    So i don't need to remove the HDD bay at all?
  16. if you put your HDD's down to the bottom, you won't have to touch it. It appears you can't move the HDD bay, the site's measurement is from the end of bay to rear of case.
Ask a new question

Read More

NZXT Cases Graphics Cards Graphics