- May 11, 2014
- 19
- 0
- 4,510
I applied new thermal paste, because I learned that I put too much the first time, but now my system will not show a display. I have tried many, many things. I do not have a system speaker, so I cannot say anything about beeps. By the way, the system does power up, fans spin and driver checks itself.
I have checked my GPU by trying it in a different slot and by using it in another system
I have made sure everything is plugged in
I have checked all the screws
I have reset CMOS
I have tried different monitors
I have cleaned the CPU and reapplied a few times
I have checked all the screws and made sure everything is screwed in
I made sure I did not get CPU on the board or the CPU
I have left everything unplugged for 10 minutes
I have reseated all the wires
I have checked the pins to make sure they aren't bent
Nothing is touching the bare metal of my case
CPU: 8350
CPU Cooler: CM Hyper 212 Evo
Motherboard: AsRock 970 Extreme3 R2.0
GPU: Asus 280x
PSU: Antec High Current Gamer 620w
I have checked my GPU by trying it in a different slot and by using it in another system
I have made sure everything is plugged in
I have checked all the screws
I have reset CMOS
I have tried different monitors
I have cleaned the CPU and reapplied a few times
I have checked all the screws and made sure everything is screwed in
I made sure I did not get CPU on the board or the CPU
I have left everything unplugged for 10 minutes
I have reseated all the wires
I have checked the pins to make sure they aren't bent
Nothing is touching the bare metal of my case
CPU: 8350
CPU Cooler: CM Hyper 212 Evo
Motherboard: AsRock 970 Extreme3 R2.0
GPU: Asus 280x
PSU: Antec High Current Gamer 620w
Facebook
Twitter
Instagram