Screen Stays Black when PC is still on

KiLLMasTer20

Honorable
Apr 9, 2014
97
0
10,660
Ok guys I got a new Video Card and when i try to turn my PC on the Screen is Black but the PC comes on. So i turned it off and back on 5 time and Finley the screen shows so i was thanking it was my PSU so i go and get a new one and it still is doing it plz help this is driving me NutZ lol...

Motherboard:
FOXCONN 2AB1

RAM:
8.00GB Dual-Channel DDR3

CPU:
AMD Phenom II X4 830

Graphics:
HD 7950 3GB

PSU:
850w
 
Solution
That may be GPU driver problem. You said this problem began with the installing the new graphics card. Perhaps you should return the GPU, and start over with a new card.
Open up the side of the case. Check if the graphics card fans are spinning. Check if the case fans are spinning. Check if the motherboard LED"S are lit up. If the graphics card fans aren't spinning the it indicates a graphic card problem. If the case fans and motherboard LED'S are off it indicates a power supply problem.
 
Go through the check lists. They cover most of the common problems that will cause a problem like this. Do you have a case speaker? If so are there any beep codes? Or if you have an LED error display, are there any error codes?

One problem that isn't very obvious is a RAM error. Remove the RAM sticks one at a time, Clean the RAM contacts and blow out each RAM slot. Then re-seat the RAM stick.
 
We have eliminated the monitor and graphics card.

Memory.
Did you re-seat the RAM? Did you run memtest on the RAM?

Motherboard.
Did you get a case speaker and check for beep codes? Have you tried switching to integrated graphics?

Power Supply.
Did you monitor the power supply? Did you check the voltages with a multimeter?
Did you switch out the power supply with a working power supply.

Monitor
Have you tried waiting a few (3 - 5) minutes before hitting the power button? Have you tried switching the monitor cables? Have you tried switching monitor cable types?

BIOS
Have you checked if the PCI X16 SLOT is selected for your graphics (when using a graphics card)?

 

KiLLMasTer20

Honorable
Apr 9, 2014
97
0
10,660
Ok i toke the Video card out and used the integrated graphics and it works so now i need to look at the video card.... but in i do get it to come on with the video card and i play game it run BF4 with about 70 - 80 fps with high setting so i dont get why it takes me 5 time to get the video card to boot in to windows