H60 register N.A on z87 asus hero

Brandon Koh Rong Xing · May 14, 2014

hi i am not sure why i am unable to monitor my h60 pump speed but when i plug it into the cha fan i can hear the pump spinning but at the same time it will register N.A in the bios on the respective fan header i plugged in . i called up the place i brought the cooler from they told me the pump speed cant be monitored in the bios . may i no is this normal ? or there is some other way that check if my cooler is working or not?

kiezz · May 14, 2014

no you can't monitor pump speed its meant to be supplied permanent voltage if you have it connected to a fan header you need to turn off the fan control for that connection

Brandon Koh Rong Xing · May 14, 2014

so this mean i am unable to monitor it through any means ? but i search online and everyone say that their h60 is running at 4000 rpm - whatever rpm . but why cant i monitor it ? if i am unable to monitor it, i am unable to use fan xpert as my cpu fan will always register 0 rpm and my cpu_opt fan ( radiator fan) will be running at 100% which is very loud . Is there any other way i could monitor it ?

kiezz · May 15, 2014

the fan that is on the radiator should be plugged into the cpu fan header and the pump should be plugged into the cpu_opt fan header,
in bios leave fan control on the cpu fan but disable it for cpu_opt fan so the pump runs 100% but the fan which causes noise will be controlled by cpu temperature

Search

H60 register N.A on z87 asus hero

Brandon Koh Rong Xing

Reputable

kiezz

kiezz

Distinguished

Brandon Koh Rong Xing

Reputable

kiezz

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page