Sign in with
Sign up | Sign in
Your question
Solved

NZXT H440 Fan Hub Controller?

Tags:
  • NZXT H440 Case Fan Controller Hub PCI Rheostat Fans
  • Systems
Last response: in Systems
Share
May 15, 2014 9:51:46 AM

I purchased the NZXT H440, and realized the case has no controller to the fan hub. It just supplies a constant 12V from the PSU. I am wondering if any of the following case peripherals will let me control the voltage being supplied to the built-in hub.http://www.frozencpu.com/products/5880/fan-295/Cooljag_...

http://www.frozencpu.com/products/10585/cpa-323/Lian_Li...

Maybe something like this with a built-in voltage control? Or a mod to place a switch in between the hub and Molex connector on the case?

http://www.frozencpu.com/products/14665/ele-991/4-Pin_P...

Thanks!

More about : nzxt h440 fan hub controller

Best solution

May 15, 2014 10:05:14 AM

K3NN3Y said:
I purchased the NZXT H440, and realized the case has no controller to the fan hub. It just supplies a constant 12V from the PSU. I am wondering if any of the following case peripherals will let me control the voltage being supplied to the built-in hub.http://www.frozencpu.com/products/5880/fan-295/Cooljag_...

http://www.frozencpu.com/products/10585/cpa-323/Lian_Li...

Maybe something like this with a built-in voltage control? Or a mod to place a switch in between the hub and Molex connector on the case?

http://www.frozencpu.com/products/14665/ele-991/4-Pin_P...

Thanks!


The issue with placing a fan controller between the molex power source and the fan hub is that the nine fans to which it supplies power is that that is a CRAPLOAD of draw for one fan resistor, and you would probably blow it up.
Share
!