- May 16, 2014
- 2
- 0
- 4,510
OK my monitor went out i was using (tv) for my computer monitor. Resolution was set very high on the tv. I don't have the same resolution on any other tv/monitors at my house. I need to get into safe mode but i cant. i need to get into safemode to change resolution to 800x600 or whatever lowest would be so i can put it on new LCD screen to change resolution to correct setting. Everything i plug it into says "out of rage" so i do not have a monitor that's in range.
1. usb only keyboard (tried 2 different usb, and bluetooth usb)
2. no ps/2 socket on mobo
3. keyboard does not light up until starting windows (loads windows and black screen because resolution is set to high)
4. cant get into bio's with keyboard because it will not power on/ cant power on usb keyboard because can't change setting inside bios (revolving cycle i know)
5 computer works just fine
computer info
dell dimension e521
4gb ram
stock bio's/ chipset
windows xp
i only use this computer for my plotter/cnc machine
once again thank all of you in advance for your help
1. usb only keyboard (tried 2 different usb, and bluetooth usb)
2. no ps/2 socket on mobo
3. keyboard does not light up until starting windows (loads windows and black screen because resolution is set to high)
4. cant get into bio's with keyboard because it will not power on/ cant power on usb keyboard because can't change setting inside bios (revolving cycle i know)
5 computer works just fine
computer info
dell dimension e521
4gb ram
stock bio's/ chipset
windows xp
i only use this computer for my plotter/cnc machine
once again thank all of you in advance for your help
Facebook
Twitter
Instagram