Sign in with
Sign up | Sign in
Your question
Solved

ASRock 990FX Extreme9 Dr Debug 5d error code

Tags:
  • Boot
  • ASrock
  • Motherboards
  • Debugger
Last response: in Motherboards
Share
May 17, 2014 3:31:32 AM

Hi,

I'm getting this error code everytime I try and boot the machine. ASRock don't list this error code on their website for this board (http://www.asrock.com/support/qa/TSDQA-102.pdf) so I don't know what it's referring to or how to fix it. I can power the computer on, although nothing will display on the screen. Pressing the reset button (to reboot) it will proceed past this error code and boot normally into Windows. Resetting the CMOS didn't help either, neither did moving my RAM from slots A1 and B1 to slots A2 and B2

The best thing I could find about this error code is here: http://forums.tweaktown.com/asrock/48092-dr-debug-error...

This is for the Extreme4 though and I have the Extreme9. It specifies "0x5C-0x5F Reserved for future AMI error codes 5D should fall in this area." which presumably means it's a blank error code? I just want to know what it is and what it means so I can fix my issue.

Any help would be appreciated,
many thanks

More about : asrock 990fx extreme9 debug error code

Best solution

a c 1530 V Motherboard
May 17, 2014 12:31:40 PM

Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.

Asrock.com
Share
!