Sign in with
Sign up | Sign in
Your question
Solved

Pc succesful post but no display

Tags:
  • Graphics
  • Displays
  • Monitors
Last response: in Graphics & Displays
Share
May 17, 2014 9:09:10 AM

My pc wont even display anything now it was working fine yesterday morning then i stepped out for like three minutes and when i came to get back on my monitor was showing a blnk screen with a white line blinking at the top left of it indicating that i dont have a bootable device i was very confused so i turned everything off and reseated HDD 3x thenvthe fourth time i did it my monitor became distorted then it hust sayed monitor going to sleep( to save power) after like over 5 reboots same thing ive reset the CMOS 3x then it gave me a memory parity error then u reseated everything and the everything and the error was gone i know nothing is wrong with my gpu because even my integrated graphics isnt even showing display. Though when it happened my cpu was clickef to 4.2 ghz but ive been clocking my cpu to 4.6 ghz and sometimes my voltage up to 1.550 its usually at at 1.400 ive never botherd the voltage on my gpu though so could u please tell me how to fix this problem. Oh and My Psu is fine too like i said i have a succesful post i get one beep been hearing that one beep since i got my pc

My specs
Amd A6 5400k 3.6ghz
AMD Vapor-X HD 7770 OC Edition
400w PSU
1TB HDD
Windows 8.1

And i forgot to add it all happened after windows a windows update

More about : succesful post display

Best solution

May 17, 2014 9:16:58 AM

Oh forgot 6gb DDR3 ram.
Share
!