H80i issue, cpu temp. is at 0

Toggle sidebar Toggle sidebar
R

ricmercedes

Reputable
May 17, 2014
9
0
4,510
Hello there, i need help with my h80i, pump fan and CPU Fans 1 & 2 do not show in the Main Console they seem to be missing... i have only used this cooler on windows 8.1 but i'm not sure about other windows versions, also i already updated my corsair link and all drivers, workaround method with regedit software and still not working. please help me out
 
Solution
nukemaster
The actual H80i should work without even needing Corsair Link. Link lets you change settings, but once changed they seem to stay.

A fan showing at 0 only tends to happen when the fan is spinning very slow. I do not think the default settings will allow it to get that slow.

I also want to make sure you are monitoring the H80i fans and not a fan sensor on your board.

Programs like HWmonitor can be used to confirm your system temperatures, but will not see the H80i fan speeds. They can see the pump speed however.

I know they have had some reported software issues with Link under Windows 8, so it may be best to contact Corsair support to see if they have any suggestions. I do not have the H80i(Since I have no USB from the unit to my...
Sort by date Sort by votes
nukemaster

nukemaster

Titan
Nov 23, 2004
19,626
6
74,965
Are the fans spinning.

I know this will sound like a dumb question, but you connected the fans to the pump and not the motherboard right?

I have only tried Link under 7 and it worked fine. I currently use my board to control the fan speeds however(meaning the fans connect to my board.).
 
Upvote 0 Downvote
nukemaster

nukemaster

Titan
Nov 23, 2004
19,626
6
74,965
Strange. It should not actually react to cpu temps, but instead react to a sensor inside the pump itself.

I have to set a custom fan profile when I was using it to control fans because I found it was a bit aggressive(I will take a bit higher temperature for more quiet operation.).
 
Upvote 0 Downvote
R

ricmercedes

Reputable
May 17, 2014
9
0
4,510
my bad nukemaster my cpu temp. doesn't reach 0, it's my fan speed that reaches 0. Damn :( what should i do now? should i downgrade to windows 7? btw i forgot to mention that when i start to play games on my computer for like 20-30mins, my corsair link start to detect the fans speed and then the cpu temp. goes down.
 
Upvote 0 Downvote
nukemaster

nukemaster

Titan
Nov 23, 2004
19,626
6
74,965
The actual H80i should work without even needing Corsair Link. Link lets you change settings, but once changed they seem to stay.

A fan showing at 0 only tends to happen when the fan is spinning very slow. I do not think the default settings will allow it to get that slow.

I also want to make sure you are monitoring the H80i fans and not a fan sensor on your board.

Programs like HWmonitor can be used to confirm your system temperatures, but will not see the H80i fan speeds. They can see the pump speed however.

I know they have had some reported software issues with Link under Windows 8, so it may be best to contact Corsair support to see if they have any suggestions. I do not have the H80i(Since I have no USB from the unit to my board, Link would not even work) on a Win8 system.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom