CoolerMaster Hyper 212 EVO

Jovan93

Reputable
May 18, 2014
768
0
5,060
Hi there all
im building my pc and im a first time builder i need a few tips so i whould be thankfull for your reply very much here goes the question:

How to place my CoolerMaster Hyper 212Evo in CoolerMaster HAF 912Plus case?

couse it haves free spot for fan on the uper part of case ill go with the 200mm MegaFlow and on the side as well i have a free spot but for 140mm or 120mm fan im going with 120mm corsair highflow performance fan

I was wondering should i place my cpu cooler vertical or horizontal?

I wanted to place vertical so the 200mm fan exhaust that warm air on top ill go with push-pull system so give me your opinion what do you think i should do? i think that the 200mm fan is going to suck out warm air better then stock 120mm from back it was more logical to me solutions but will it fit and that stuff is it possible to do?

My specs are:

Intel i5 4670K

Gigabyte GTX 760 OC 2GB

Gigabyte Sniper G.1 Z87

Kingston HyperX Furry White 10CL 1866MHz 2x4Gb

HDD WD Green 1Tb

PSU: CoolerMaster V650S 650W

 

Jovan93

Reputable
May 18, 2014
768
0
5,060


you didnt understand me i said how to place it in should i go vertical or horizontal affcourse i meant on cpu does it not say CPU Cooler i know what cpu cooler is man i just asked how to place it in that case couse it haves fan slot on top bigger one 200mm should i place it vertical so the fan exhaust on top or place it horizontal so the back fan exhaust

 

Jovan93

Reputable
May 18, 2014
768
0
5,060


yea every build is like that so ill just change the rear exhaust fan to a better on so it whould be good i guess ill go with corsair fans they have good revievs performance series ones i just tought it whould be maybe better that the cpu cooler exhaust warm air on top couse the fan is 200mm but ill go with horizontal couse everyone is doing it like that then it cant be wrong ty for reply nice day to you
 

Vic 40

Titan
Ambassador
I would let it blow to the back of the case.I think that with the heatpipes that way it will perform as it should.Some coolers have a dedicated (?) way of installing,i think because of this.It's also the way described in the manual.i think for a reason.

You have to much money that you also want to replace the rear fan? Well in the end is that up to you,look with corsair fans for those twinpacks (i think they are there if you need more) ,they are often cheaper.

Is that the only hdd you're going to put in your system? With it being a lower rpm drive might it not give the performance you want.I would go for a 7200rpm drive if it was the only one.
 

Jovan93

Reputable
May 18, 2014
768
0
5,060


ty for heads up i didnt know that was a lower rpm hdd ill go with seagate baracuda 7200rpm 1Tb

ok ill install it horizontaly tnx for tip ill see about back fan if this one is bad ill replace it its like 10-15 euros but its a HAF (High air flow) case i dont think it should be bad but we will see
 

Jovan93

Reputable
May 18, 2014
768
0
5,060


thats really good to know i saw the case and fall in love with it its so clean and masive i like the design of the whole thing hopefully im building my pc next week i cant wait to change this on 7yrs old system GT8500 and AMD 4000+ all that with biostar Mobo :))))) it served me well during this years but its time for changes to be made :)))
 

Dark Lord of Tech

Retired Moderator
Set it up like this.

xcw58i.png
 

D BIIJOU

Reputable
Aug 21, 2014
46
0
4,560
I placed mine horizontally at first, and later on changed it to vertical. to make room for the kingston hyper x memory cooler. make sure you get it right the first time as it is a pisstake to install.
 

TRENDING THREADS