Cooler Master Hyper 212 EVO fan removal
- Thread starter reubenno
- Start date
Solution
Ubrales
Polypheme
- Dec 3, 2009
- 13,238
- 11
- 61,465
The fan is clipped on with plastic retainer clips. Under normal circumstances you do not need to and should not remove the fan every time to clean with compressed air.
During assembly I used a small flat blade screwdriver to remove the fan and re-install it after the RAM was installed.
My system has been running for a year and a half. I clean once or twice a month using a can of compressed air.
During assembly I used a small flat blade screwdriver to remove the fan and re-install it after the RAM was installed.
My system has been running for a year and a half. I clean once or twice a month using a can of compressed air.
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,616
- 1,779
- 159,590
Section 5 shows the clips.
http://support.coolermaster.com/entries/22215170-Hyper-212-Series-AMD-Installation
http://support.coolermaster.com/entries/22215170-Hyper-212-Series-AMD-Installation
Facebook
Twitter
Instagram