renmb Reputable Apr 23, 2014 51 0 4,630 May 20, 2014 #1 So, What's the correct config of my bios? Currently: Should I Enable XMP_1 or something? Thanks!
Solution R R redheat2010 May 20, 2014 Yes you need to enable XMP_1 for getting the correct speed although after booting into system it will show 933 mhz.
Yes you need to enable XMP_1 for getting the correct speed although after booting into system it will show 933 mhz.
R redheat2010 Honorable Sep 17, 2012 334 0 10,860 May 20, 2014 Solution #2 Yes you need to enable XMP_1 for getting the correct speed although after booting into system it will show 933 mhz. Upvote 0 Downvote Solution
Yes you need to enable XMP_1 for getting the correct speed although after booting into system it will show 933 mhz.
Tradesman1 Legenda in Aeternum Jun 5, 2013 67,883 40 126,960 May 20, 2014 #3 Try XMP and if no joy raise the CPU/NB voltage + 0.07 and the DRAM voltage + 0.05, if still no joy might be your 6300 can't handle 1866, would then try at 1600 9-9-9-24 Upvote 0 Downvote
Try XMP and if no joy raise the CPU/NB voltage + 0.07 and the DRAM voltage + 0.05, if still no joy might be your 6300 can't handle 1866, would then try at 1600 9-9-9-24
renmb Reputable Apr 23, 2014 51 0 4,630 May 20, 2014 #4 I just loaded the XMP, I think it's ok: Upvote 0 Downvote
Tradesman1 Legenda in Aeternum Jun 5, 2013 67,883 40 126,960 May 20, 2014 #5 Looks good, 1862.6! There will be slight variations, a slight DRAM voltage increase might hit it right on 1866 Upvote 1 Downvote
Looks good, 1862.6! There will be slight variations, a slight DRAM voltage increase might hit it right on 1866
renmb Reputable Apr 23, 2014 51 0 4,630 May 20, 2014 #6 how much should I increase? And my temp won't go up right? I'm using stock cooler with mx-4. Upvote 0 Downvote