- May 21, 2014
- 5
- 0
- 18,510
Good morning, good afternoon, and good evening everyone. So I just purchased a new antec case so I began taking everything from my old case and installing them into the new one. Everything looks to be connected and when I hit the power button the computer displays the mobo splash screen and sits there. It says "press delete to enter settings" but pressing delete with a working keyboard (I tried several) does nothing. I tried hitting delete as the computer booted up and it says "entering settings" but it doesn't do anything and sits there. I'm afraid it might be a hardware problem. As I was connecting everything I accidentally put the cmos jumper onto the reset pins and booted so I'm not sure if that might be the problem. I've tried removing the cmos battery and replacing it but no prevail. I know my CPU has bent pins that I've bent back and it worked before the change of cases and my HDD is pretty old (150gb) so those might be bad. I also have a new 2tb HDD and amd fx 8 core processor I'm waiting to install when when I know my computer actually boots properly. Any kind of help would be so appreciated! I'm hoping to play Watch_Dogs this weekend!
A880g biostar motherboard
Amd phenom 965 4 core black edition CPU
x2 8gb Ram
150 gb HDD
800 watt PSU
Sorry for no specifics on some parts, I'm not near my rig right now. Thank you so much for any feedback.
A880g biostar motherboard
Amd phenom 965 4 core black edition CPU
x2 8gb Ram
150 gb HDD
800 watt PSU
Sorry for no specifics on some parts, I'm not near my rig right now. Thank you so much for any feedback.
Facebook
Twitter
Instagram