dvi-i doesn't work

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680
okay so i have a gtx 750 and it has a dvi-d and a dvi-i and the dvi-i doesn't work i have vga monitor and i use a vga to dvi-i adapter it is not a problem with the monitor. i hope i explained it wel enough.
 
Solution
It can't be switched on/off. The analog signal is always on just like the digital signal. That header outputs digital just like the other header. But the 4 pins on the end provide the analog part of the signal for VGA. Either the adapter is bad or the card is. Which GTX 750 did you get?

clutchc

Titan
Ambassador
It could be a poor adapter. Try plugging it in few times. Do you have another laying around? The DVI-I is the only header that contains an analog signal, and the adapter wouldn't fit in the DVI-D header, so there's no chance you have the wrong header.
Is the VGA cable the same one that worked before?
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680
yes the vga cable has worked before and i just bought the adapter so i doubt there is something wrong with that, could it be that the dvi-i port on my graphics card is switched off? and if that is the case, how do i put it back on?

 

clutchc

Titan
Ambassador
It can't be switched on/off. The analog signal is always on just like the digital signal. That header outputs digital just like the other header. But the 4 pins on the end provide the analog part of the signal for VGA. Either the adapter is bad or the card is. Which GTX 750 did you get?
 
Solution

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680

uh, the adapter and the port on my card doesn't have those 4 pins, and i just have a normal gtx 750 i don't know what else i can say about it

 

clutchc

Titan
Ambassador

The adapter should look like this on the end that plugs into the gfx card: https://discussions.apple.com/servlet/JiveServlet/showImage/2-22869650-291754/800px-DVI_pinout.svg.png
Does your adapter have the 4 pins marked C1, C2, C3, and C4? Those carry the analog (VGA) signal.

I was hoping you could tell me the make/model of your gfx card.
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680

no it doesn't have the c things, if you can tell me where i can find the model number i can tell you
 

clutchc

Titan
Ambassador
If it doesn't have the 4 pins for analog, that is why it isn't working. You need one of these: http://www.walmart.com/ip/Micro-Connectors-DVI-VGA-Adapter-DVI-Analog-Male-to-HD15-Female/27335822?adid=22222222227000000000&wl0=&wl1=g&wl2=c&wl3=41833582510&wl4=&wl5=pla&wl6=19880599990&veh=sem
But to be honest, I never saw a vga adapter that didn't have those pins. It's not a vga adapter w/o them. Can you post a pic of it? Or a link to one like it?
You don't know the make or model of your gfx card? Never mind. Just get yourself the proper DVI to VGA adapter.
...or, does your monitor have a DVI header? Or is it just VGA?
 

clutchc

Titan
Ambassador
That pic is not a DVI to VGA adapter. It has no way of picking up the analog signal w/o those 4 pins above/below the flat blade. Why do they sell it? I have no idea.

If you get a mini HDMI to VGA adapter CONVERTER, yes. At least technically it should. HDMI is strictly digital, so it needs a converter to convert digital to analog. http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=HDMI+to+VGA+Adapter+Converter&N=-1&isNodeId=1
But I cannot vouch for their quality. Never used one.

Your best solution is to get a REAL DVI-I to VGA adapter. The signal is already converted in the card at the DVI_I header.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814999201&cm_re=dvi_i_to_vga_adapter-_-14-999-201-_-Product
...five and a half bucks and your problems are over.
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680
but wich connection has my graphics card then? it has that slice but it hasn't got those 4 pins... so a real dvi-i adapter won't work is it a dvi-d connection maybe?

 

clutchc

Titan
Ambassador
I can't say until I know the make/model of your GTX 750 Ti. The card should either have a blue VGA port and/or a DVI-I port so you can use a VGA (analog) monitor. If you can't open your case and read the name on the side of the gfx card, take a pic of the end of the card sticking out of the back of the case and post it here.
 

clutchc

Titan
Ambassador


I didn't say the name was on the back, I said the name was on the side. The side facing down in most cases.
I said to take a pic of the back so I could see the ports myself.

Open the NVCP and look, if you want to.
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680
sorry! but here is a link:
file:///C:/Users/Gebruiker/Pictures/2014-06-01/738.jpg ( i hope this link works :p )
 

clutchc

Titan
Ambassador


There you go! Nice pic. But I almost forgot what the question was... oh yeah, the 4 pins/pin holes you said your DVI-I port did not have. In the pics you presented, the top port is the DVI-I port. It does indeed have the 4 pin holes surrounding the flat slot. The port below it is the DVI-D port. You need to use the correct VGA/DVI-I adapter in the top port. The top port in the pic. anyway.

Now let's see what the adapter you are using looks like. Both ends, please.
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680

okay this is the back: http://postimg.org/image/p58dp0ijx/
and this is the front: http://postimg.org/image/74ssowujj/
oh and it is the bottom one that doesn't work.
 

clutchc

Titan
Ambassador

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680


Well then I should get an hdmi to vga adapter wouldn't I? ( if that works ) thanks for the help!
 

clutchc

Titan
Ambassador
HDMI to VGA are problematic because HDMI does not carry an analog signal; just digital. So the adapters are more expensive due to the fact that they need to have their own D/A converter.

But you shouldn't NEED one of those. Just get a VGA/DVI adapter with the 4 pins surrounding the flat blade like I linked you to. Your whole problem is that the crappy adapter you have does not provide analog. Where can you shp online? I'll point you to the correct adapter. Amazon?
 

Emiel_lol

Honorable
Jan 22, 2014
102
0
10,680

no, i already have one with 4 pins for my first monitor and i have another one, but the adapter fits in, so i do need an hdmi to vga! because the connection/input doesn't have 4 pins.