K kathir28 Reputable May 13, 2014 97 0 4,640 May 24, 2014 #1 Hello does it take much do bend a lga 1150 pin ?
Solution Zephyrium May 25, 2014 kathir28 : Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure? That shouldn't be enough you can always check and make sure it's usually pretty easy to spot a bent pin.
kathir28 : Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure? That shouldn't be enough you can always check and make sure it's usually pretty easy to spot a bent pin.
Zephyrium Reputable May 17, 2014 122 0 4,710 May 24, 2014 #2 It doesn't take much to bend a pin a little pressure in the wrong place will do it. Upvote 0 Downvote
K kathir28 Reputable May 13, 2014 97 0 4,640 May 25, 2014 #3 Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure? Upvote 0 Downvote
Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure?
Zephyrium Reputable May 17, 2014 122 0 4,710 May 25, 2014 Solution #4 kathir28 : Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure? That shouldn't be enough you can always check and make sure it's usually pretty easy to spot a bent pin. Upvote 0 Downvote Solution
kathir28 : Zephyrium : It doesn't take much to bend a pin a little pressure in the wrong place will do it. For example if you accidentally put the plastic protector underneath the metal tray, but do not apply pressure? That shouldn't be enough you can always check and make sure it's usually pretty easy to spot a bent pin.