- May 14, 2014
- 131
- 0
- 4,680
Hello,
I'm making a gaming PC for video editing, graphic design and of course, gaming. I have decided to watercool it and I would like to know if it would work with the watercooling parts I have selected?
Below is the computer specifications:
NZXT PHANTOM 820 CASE.
Intel Core i7 4930K Extreme Hex Core CPU
ASRock X79 Extreme9 Motherboard
EVGA NVIDIA GeForce GTX 780 Ti 3GB Dual Classified
Kingston HyperX Beast 16GB (4x4GB) DDR3 2400MHz Desktop
Seagate 7200.14 3TB SATA III 3.5" Hard Drive
Samsung 840 EVO 500GB 2.5-inch Basic SATA Solid State Drive
Corsair AX860i 860W Power Supply 80 Plus Platinum
Watercooling parts:
Alphacool NexXxoS XT45 Full Copper 360mm Radiator
Alphacool NexXxoS XT45 Full Copper 240mm Radiator
Alphacool Cape Corp Coolplex Pro 25 LT Reservoir
Alphacool VPP655 - G1/4 IG complete with D5 HF Top Pump
Watercool HEATKILLER ® GPU-X ³ GTX TITAN/780/780Ti Hole Edition - Ni-Bl
Primochill PrimoFlex LRT Advanced hose 13/10 mm - Crystal Clear, 2M
EK Water Blocks EK-Supremacy - Acetal
13/10mm (10x1.5mm) Compression Fitting 90° Rotary Outer Thread 3/8 (x8)
13/10mm (10x1.5mm) Compression Fitting Outer Thread 3/8 (x5)
Alphacool pump mount universal for 120-140mm fans/radiators
+Fans.
Basically the 360mm would go at the top and the 240mm at the bottom. Starting from the pump it would go to the bottom radiator, then from the radiator to the GPU, then to the top radiator, then to the CPU, then finally from the CPU to the reservoir.
Will this work? Are the parts compatible?
I am a noob when it comes to watercooling, so help would be greatly appreciated.
I'm trying to create the same loop as this person on YouTube here as it looks effective and what I need: https://www.youtube.com/watch?v=W7BdBPSx92M
Thanks,
Harry
I'm making a gaming PC for video editing, graphic design and of course, gaming. I have decided to watercool it and I would like to know if it would work with the watercooling parts I have selected?
Below is the computer specifications:
NZXT PHANTOM 820 CASE.
Intel Core i7 4930K Extreme Hex Core CPU
ASRock X79 Extreme9 Motherboard
EVGA NVIDIA GeForce GTX 780 Ti 3GB Dual Classified
Kingston HyperX Beast 16GB (4x4GB) DDR3 2400MHz Desktop
Seagate 7200.14 3TB SATA III 3.5" Hard Drive
Samsung 840 EVO 500GB 2.5-inch Basic SATA Solid State Drive
Corsair AX860i 860W Power Supply 80 Plus Platinum
Watercooling parts:
Alphacool NexXxoS XT45 Full Copper 360mm Radiator
Alphacool NexXxoS XT45 Full Copper 240mm Radiator
Alphacool Cape Corp Coolplex Pro 25 LT Reservoir
Alphacool VPP655 - G1/4 IG complete with D5 HF Top Pump
Watercool HEATKILLER ® GPU-X ³ GTX TITAN/780/780Ti Hole Edition - Ni-Bl
Primochill PrimoFlex LRT Advanced hose 13/10 mm - Crystal Clear, 2M
EK Water Blocks EK-Supremacy - Acetal
13/10mm (10x1.5mm) Compression Fitting 90° Rotary Outer Thread 3/8 (x8)
13/10mm (10x1.5mm) Compression Fitting Outer Thread 3/8 (x5)
Alphacool pump mount universal for 120-140mm fans/radiators
+Fans.
Basically the 360mm would go at the top and the 240mm at the bottom. Starting from the pump it would go to the bottom radiator, then from the radiator to the GPU, then to the top radiator, then to the CPU, then finally from the CPU to the reservoir.
Will this work? Are the parts compatible?
I am a noob when it comes to watercooling, so help would be greatly appreciated.
I'm trying to create the same loop as this person on YouTube here as it looks effective and what I need: https://www.youtube.com/watch?v=W7BdBPSx92M
Thanks,
Harry
Facebook
Twitter
Instagram