Airflow setting for my case

Toggle sidebar Toggle sidebar
V

Vulmaro

Distinguished
May 12, 2014
159
3
18,695
Hi,

I am using akasa zen and it has two fans, one is in the front bottom to intake, the second the exhaust one is in the back of the case and it's under the psu which has exhaust.

So my quest is, I am about to buy seidon 120v so I will have to fit its radiator into back exhaust fan slot.

What do you suggest me with the exhaust fan ? Can ı Use it on the sıde panel as an intake fan ? and should I get one more fan too ? There are no grids for cooling from top or bottom.

I have heard that If I fit the radiator in exhaust fan place, It will be bad for its cooling. Does my PSU's exhausting enough ?
 
Solution
Swordkd
I just read a review on that model, and it comes with the hardware to install it with the current case fan. So you have your current back fan as the pull, the radiator in the middle, and the new fan as the push. Everything on the inside of your case. It'll have instructions on how to do that, so you're golden.
Sort by date Sort by votes
V

Vulmaro

Distinguished
May 12, 2014
159
3
18,695


Good Idea but I dont know where to put the radiator then.

I prefer it inside my case
 
Upvote 0 Downvote
Swordkd

Swordkd

Splendid
Oct 3, 2012
2,795
1
21,965
I just read a review on that model, and it comes with the hardware to install it with the current case fan. So you have your current back fan as the pull, the radiator in the middle, and the new fan as the push. Everything on the inside of your case. It'll have instructions on how to do that, so you're golden.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom