Hey, I know that people have asked this before but I've tried almost everything but nothing works. So I just built my new PC:
AMD A6 5400K
ASUS A55BM-K Mobo
XFX Radeon 7750
500gb WD HDD
4gb DDR3 GSkill Mem
480w PSU Logisys (with case)
and I connected everything, did everything in almost every list I found but the problem is that I still cannot get a display in my monitor even though the PC turns on and the MOBO light is green and no beeps.
First time I did install MOBO without the copper pegs...could I have burned out my mobo? but if I did would the CPU fan and GPU fan not turn on? cus mines are on just no display.
AMD A6 5400K
ASUS A55BM-K Mobo
XFX Radeon 7750
500gb WD HDD
4gb DDR3 GSkill Mem
480w PSU Logisys (with case)
and I connected everything, did everything in almost every list I found but the problem is that I still cannot get a display in my monitor even though the PC turns on and the MOBO light is green and no beeps.
First time I did install MOBO without the copper pegs...could I have burned out my mobo? but if I did would the CPU fan and GPU fan not turn on? cus mines are on just no display.
Facebook
Twitter
Instagram