Sign in with
Sign up | Sign in
Your question
Solved

help no sign of power

Tags:
  • Switch
  • Build
  • Power
Last response: in Technologies
Share
May 28, 2014 1:58:21 PM

So I finally completely my 1st build and nothing happen. When turn everything on there was no beep nothing at . No fans spinning nothing no weird noises. I have unplugged replug . I think it might be my Psu . Any advice will help thanks!

More about : sign power

Best solution

May 28, 2014 2:07:32 PM

Unplug all of the power and reset and HDD/ on led wires from your board and try to jump the pins on your motherboard via a screwdriver. If that doesn't work, and you are 100% sure that the 20+4 pin and 4+2 (or 4+4) CPU power pin are plugged all the way in. If you still get no response, try to jump the PSU itself.
http://forum.overclock3d.net/showthread.php?t=394
Share
!