asrock z77 extreme 4 error code 55
- Thread starter froller2
- Start date
Solution
- Nov 11, 2013
- 17,389
- 4
- 66,960
did you set your memory in the bios to its xmp ?? will it do this when your using default bios settings? are you trying to set some overclock on them? be sure the memory is fully seated in there correct slot? is the memory on the boards compatibly list? did you check for bent pins in the cpu socket?
- Nov 11, 2013
- 17,389
- 4
- 66,960
- Nov 11, 2013
- 17,389
- 4
- 66,960
also theres a lot of blue 1600 memory witch one is it give me something like this
[KHX1600C9D3B1K2/8GX]
[KHX1600C9D3B1K2/8GX]
- Oct 29, 2013
- 442
- 0
- 10,790
- Nov 11, 2013
- 17,389
- 4
- 66,960
- Nov 11, 2013
- 17,389
- 4
- 66,960
I will assume that you did not buy them as a kit? this may be part of the issue the 2 even being the same may not match up as would 2 matched sticks in a 2 stick kit they are binned at the factory and tested to work together where a single stick did not and was sold that way--- so how well does it work with just one stick??
- Nov 11, 2013
- 17,389
- 4
- 66,960
- Nov 11, 2013
- 17,389
- 4
- 66,960
I cant find out much on it .. look if you feel the board is bad and you need to rmma or something don't jack around and loose out on that
- Nov 11, 2013
- 17,389
- 4
- 66,960
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,614
- 1,778
- 159,590
What are you using for a cooler?
Make sure any cooler you are using isn't tightened to much because it can flex the board and cause ram slot issues.
Make sure any cooler you are using isn't tightened to much because it can flex the board and cause ram slot issues.
- Oct 29, 2013
- 442
- 0
- 10,790
using a coolermaster seidon 120mm the issue today happend after i turned the radiator another way in hope for better cooling, then after and hour or so i bsod and the pc rebootet and gave me the error.
i then turned the radior back to the place it was before and removed and reset the ram and it worked again..
i just have no idea what causes it and it anoys the hell out of me and actually scares me quiet a bit
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,614
- 1,778
- 159,590
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,614
- 1,778
- 159,590
It's strange , but I've seen this several times , just a different position and bam the slots work.
Doesn't mean the board is crap , actually I own that board is a great one.
Doesn't mean the board is crap , actually I own that board is a great one.
- Nov 11, 2013
- 17,389
- 4
- 66,960
ok so now we need to check cpu temps but still all the slots should work as normal unless the memory controller got too hot and went bad [hope not]
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,614
- 1,778
- 159,590
Had a forum member on another site with the h100i , same issue.
Take care have a great one , thanks for posting.
Take care have a great one , thanks for posting.
- Nov 11, 2013
- 17,389
- 4
- 66,960
TRENDING THREADS
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
-
-
Question Downloads NOT working over WiFi but DO work with mobile hotspot?
- Started by louisfawk
- Replies: 8
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 4
-
Question Crashing PC during demanding games and tests (Kernel-Power 41 error)
- Started by Kubaja123
- Replies: 3
Facebook
Twitter
Instagram